Payment & Shipping Terms:
|Model No.::||S&G-PU Sandwich Wall Panel||Thickness::||0.35-0.7 Mm (As Customer`s Need)|
|Power::||300KW (According To The Thickness)||Working Efficiency::||4-8m/min|
|Forming Stations::||12 Stations||Diagonal Line Tolerance::||± 2mm|
|Shaft Material::||45#steel Processing||Pu Panel Size:haft::||Width Max 1200mm|
5 Ribs Covered 1000mm Rubber Belt Continuous PU Sandwich Panel Production Line for PU Sandwich Panels
Main Features of PU Sandwich Panel Machine:
|Material||Raw material||colored steel plate, galvanized plate, or aluminum plate|
|Thickness||0.35-0.7 mm (As customer`s need)|
|Feeding width||300mm-1250mm (According to customer`s profile)|
|Material hardness:||550 Mpa---350 Mpa|
|Max Coil width||1500mm|
|Hydraulic cylinder lift stroke||Up panel 0.5m, Down panel 0.5m|
|Coil car stroke||2.5m|
|Pressure of hydraulic system||6.3Mpa|
|Forming steps||24 stations ( Depend on Profiles )|
|Design type||Middle plate welded|
|Transmission||Gear box (Chain and gear box depend on thickness and customer`s need)|
|Machine frame||350# H steel welded; Steel plate welded/ Memorial arch frame type|
|Shaft material||45# steel with tempering|
|Cutting blade material||Gcr12MoV quenched|
|Power of machine||300KW (According to the thickness)|
|Type of cutting||Hydraulic|
|Material of blades||Gcr12 quenched|
|Cutter quantity||1 set|
|Pre-heating Room||Temperature sensor||Hot couple|
|Temperature adjustment||Automatic control by temperature control equipment|
|Hot air motor||18.5Kw|
|Hot air heater||200Kw|
|Heat type||Heated by electricity and air circulate|
|Flying Saw Cutting Machine||Outline dimension of band saw cutting machine||5500mmx5000mmx 3000mm|
|Run speed of band saw||1000-1500rpm|
|Rotate diameter of band saw||550mm|
|Cutting speed of band saw||50m/min-1000m/min|
|Width of band saw||30mm|
|Length of band saw||3000mm-4000mm|
|Transverse move distance||1500mm|
|Cut length on line||3000mm|
Uncoiling→ (Perforation machine )→Feeding material into machine→ Roll forming→ PU foaming→ Pre-heating Room→ Auto cutting→ Products receiving
Other Spare part
|Weight||About 25 ton|
|Dimension||42000mm * 3600mm * 3300mm|
|Main body color||As required|
|Voltage||380v/50hz/3ph(or as required)|
|Suitable working temperature||About 25℃|
|Spare cutting blade||One piece|
|Travel switch||2 pieces|
|Solenoid valve||1 pieces|
Our production system is a fully automation equipment system to produce various shapes of sandwich panels using a rigid-polyurethane foam as a core material which is known as a top insulation in nowadays with low heat conductivity, heat reserving, anti-sweating, high strength durability and availability at construction site.
• Light weight: 10~ 14 kg/m2 and hence reduced steel frameworks and system can become economical.
• Good thermal insulation, with average coefficient of thermal conductivity is 0.018 ~ 0.020 W/mk.
• Available in customized length. And in wide range of colors.
• Cold and heat resistance: Perfect temperature resistance deformation from -110º C to 120º C.
• Great energy saver and hence indispensable in air-conditioned, cooled and heated buildings.
• Virtually zero maintenance throughout life.
• Installation is convenient and Flexible; not requiring large-scale lifting devices, and thus lowering building costs.
• High intensity and large rigidity ensures suitability for weight-bearing structures and for supporting and protective structures.
• Non-water absorbent.
• Environmentally friendly. And bring down life cycle cost for any built environment.
Pu Sandwich Panel Picture: