Payment & Shipping Terms:
|Model No.::||S&G-PU Sandwich Wall Panel||Thickness::||0.4-0.7 Mm (As Customer`s Need)|
|Power::||22KW (According To The Thickness)||Working Efficiency::||4-8m/min|
|Forming Stations::||16 Stations||Roller Material::||Gcr12MoV Quenched|
|Shaft Material::||45#steel Processing||Diameter Of Shaft::||￠80mm|
|Usage::||Various Roofs And Walls Referring To Large Buildings||Material::||Nanometer Catelyst Antibacterial Plates|
Flat PU Sandwich Panel Machinery with GI or Aluminum Sheets,PU Sandwich Panel Production Line With Double-Belt Conveyor
Composition of machine
2. Upper and lower forming machine
3. Pre-heating table
4. Reaction injection machine
5.Side chemical sealing installation
6. Double-belt laminator
7. Hot-air circulator
8. Non –stop cutter
9. Run out table
Specifications of PU Sandwich Panel Production Line:
|1||galvanizes color steel coil||mm||Width: 700 ~ 1000
Thickness: 30 to 150 custom length
|2||Production line speed||m/min||4~8|
|3||Double belt laminated conveyor length||m||24m|
|4||The maximum temperature of the hot air circulation||°C||70|
|6||Line dimensions (L × W × H)||mm||About 56000×7000×3800|
|7||The total installed power capacity||Kw||About 207|
|Material||Raw material||colored steel plate, galvanized plate, or aluminum plate|
|Thickness||0.3-0.8 mm (As customer`s need)|
|Feeding width||300mm-1250mm (According to customer`s profile)|
|Material hardness:||550 Mpa---350 Mpa|
|Max Coil width||1250mm|
|Hydraulic cylinder lift stroke||Up panel 0.5m, Down panel 0.5m|
|Coil car stroke||2.5m|
|Pressure of hydraulic system||6.3Mpa|
|Forming steps||24 stations ( Depend on Profiles )|
|Design type||Middle plate welded|
|Transmission||Gear box (Chain and gear box depend on thickness and customer`s need)|
|Machine frame||350# H steel welded; Steel plate welded/ Memorial arch frame type|
|Shaft material||45# steel with tempering|
|Cutting blade material||Gcr12MoV quenched|
|Power of machine||22KW (According to the thickness)|
|Type of cutting||Hydraulic|
|Material of blades||Gcr12 quenched|
|Cutter quantity||1 set|
|Pre-heating Room||Temperature sensor||Hot couple|
|Temperature adjustment||Automatic control by temperature control equipment|
|Hot air motor||18.5Kw|
|Hot air heater||200Kw|
|Heat type||Heated by electricity and air circulate|
|Flying Saw Cutting Machine||Outline dimension of band saw cutting machine||5500mmx5000mmx 3000mm|
|Run speed of band saw||1000-1500rpm|
|Rotate diameter of band saw||550mm|
|Cutting speed of band saw||50m/min-1000m/min|
|Width of band saw||30mm|
|Length of band saw||3000mm-4000mm|
|Transverse move distance||1500mm|
|Cut length on line||3000mm|
Uncoiling→ (Perforation machine )→Feeding material into machine→ Roll forming→ PU foaming→ Pre-heating Room→ Auto cutting→ Products receiving
Other Spare part
|Weight||About 25 ton|
|Dimension||42000mm * 3600mm * 3300mm|
|Main body color||As required|
|Voltage||380v/50hz/3ph(or as required)|
|Suitable working temperature||About 25℃|
|Spare cutting blade||One piece|
|Travel switch||2 pieces|
|Solenoid valve||1 pieces|
These sandwich panels are mostly used for industrial purpose, these are very light weight but can bear
very heavy load. It also reduces the heat inside the building.
With a wide range of different colors, available in cut-to-length supply and ready-to-install,
this modern building product takes a good share in a highly economic, weather-independent and fast,
modular building process.
Beside the extremely high thermal-insulation values of the polyurethane-core,the panels create
a high overall stiffness with their "composite" function and therefore support very good statically values.
• Light weight: 10~ 14 kg/m2and hence reduced steel frameworks and system can become economical.
• Good thermal insulation, with average coefficient of thermal conductivity is 0.018 ~ 0.020 W/mk.
• Available in customized length. And in wide range of colors.
• Cold and heat resistance: Perfect temperature resistance deformation from -110º C to 120º C.
• Great energy saver and hence indispensable in air-conditioned, cooled and heated buildings.
• Virtually zero maintenance throughout life.
• Installation is convenient and Flexible; not requiring large- scale lifting devices, and thus lowering building costs.
• High intensity and large rigidity ensures suitability for weight-bearing structures and for supporting and protective structures.
• Non-water absorbent.
• Environmentally friendly. And bring down life cycle cost for any built environment.
Our Services and Terms:
Terms of Payment: 30% of the total contract value paid by T/T as down payment, the rest 70% of the total contract value to be paid by T/T after inspection by buyer in seller’s factory while before delivery.
Delivery: 100 days after receipt of advance payment
Service: we send technician to your country to install the machine.The buyer should take all the cost including: visa, roundtrip tickets and suitable accommodation, also buyer should pay salary 80 USD/day.
Warranty: 12 months limited warranty
During warranty: parts are free but buyer pay for the shipping fee
Pu Sandwich Panel Picture: